Dakota Alert™ Add-On Signal Receiver Base

The Dakota Alert Receiver is designed to receive signals from any of the 4000 series transmitters, which must be purchased separately. It supports up to four such sensors, securing different zones. The receiver plugs into a standard 12V DC outlet and features 4 form C relays, one for each transmitter. The output duration is user programmed anywhere from 1 second to 10 minutes. 12 different alarm tunes are offered, which can be used to distinguish each sensor. If you choose to install more than one transmitter, then this feature comes in handy. It allows you to set one tune for each of the zones covered by the sensors. You may also program the receiver to enable a 5-minute exit delay, where chosen transmitter will not send signal for this time. This lets you leave from selected zone without triggering the receiver alarm, which activates on receiving signal from the zone transmitter. Additionally, red blinking LED light indicators are provided for each of the four transmitters. The light flashes on receiving a signal from the connected transmitter. The transmission range between the sensor and receiver is 1 mile. For maximum advantage, the receiver should be mounted horizontally and as high above the ground as possible. However, certain terrains may affect the transmission radius.